reefphilippines.com

Apparently after 10mos of usage ( DNW-110 ) , I find my skimmer not skimming well. The factors I considered would be: The intake pump ( seaquest 800 ), the Reef Octopus recirculating pump, cleaning and water salinity. All material thing have been replaced, salinity increased to 1.025, all tubes n pipes cleaned. still no bubbles like before are being produced. What could be the problem? I don't think my water is that clean. Fishes are all healthy.

Do I need to buy another Reef Octopus? I need to identify what happened despite all the maintenance spending I've done.

bro techsheep, really OT na 'to but this is your thread naman, the most active right now in this forum is gamol (lendz), mikedown and Vin DaGunsmith

I am on semi-retirement but hoping to play in N vs S 3 soon

Make sure you have extra protection... as always safety first !

Enjoy the adrenaline rush...

Finally, skimmer worked again. Thanks for all the suggestions and advices, I've tried all the suggestive actions.

Here's what i did, cleaned the air intake but still nothing happened, poked the hole with pin, stick, toothpick. So i tried to soak it on alcohol for a day and pumped air from my basketball pin pump. Then the problem turned out to be an ant ( big ) got stuck inside that came out ( obviously dead ).

My ro is back to it's usual skimming job. thanks to those who gave suggestions.