DIY 87W (29 X 3W) Semi Full SPECTRUM LED array
![Post Post](./styles/prosilver/imageset/icon_post_target.gif)
Hi guys,
Uso naman kaya makisabay na ako..![Wink ;)](./images/smilies/icon_wink.gif)
My tank's dimension was 36x16x14(lxwxh)
DIY Semi full spec 3W LED array
Update ko na lang tong 1st page para sa pics and other procedure
Inspired by kenn's 90W LED array.. blue:white:blue
Parts used:
A. 3W LED from GoDeals (Aarongo222):
20pcs Blues
5pcs Whites
1pc Red
1pc Green
2pcs UV
B. 3pcs (7~12 x 3W) Waterproof LED Driver
C. 60 degrees LED lens (Blue LED)
D. 90 degrees LED lens (Whites, Red, Green and UV)
E. 12V PC fans (0.3A ~ 0.45A)
F. 12V 1A adaptor (supply for fans)
G. AWG#22 wires (good for 918mA of current), 3W LEDs have a 680mA forward current so this is enough
H. 24 inches heatsink
I. Thermal glue/paste
Tools for soldering, cutting wires.. etc
LEDs mounted on heatsink
![Image](http://i693.photobucket.com/albums/vv300/created2praise/IMG_20140407_105900_zpscd822a48.jpg)
Wiring done: Very straight forward wiring..
blue : white/green/red : blue.. 1 driver each channel
Without lens:
![Image](http://i693.photobucket.com/albums/vv300/created2praise/IMG_20140408_161250_zpsf4ba33c8.jpg)
With lens tested:
![Image](http://i693.photobucket.com/albums/vv300/created2praise/IMG_20140408_183958_zps1727a205.jpg)
Driver
![Image](http://i693.photobucket.com/albums/vv300/created2praise/IMG_20140401_193656_zps5f2af6ab.jpg)
Uso naman kaya makisabay na ako..
![Wink ;)](./images/smilies/icon_wink.gif)
My tank's dimension was 36x16x14(lxwxh)
DIY Semi full spec 3W LED array
Update ko na lang tong 1st page para sa pics and other procedure
Inspired by kenn's 90W LED array.. blue:white:blue
Parts used:
A. 3W LED from GoDeals (Aarongo222):
20pcs Blues
5pcs Whites
1pc Red
1pc Green
2pcs UV
B. 3pcs (7~12 x 3W) Waterproof LED Driver
C. 60 degrees LED lens (Blue LED)
D. 90 degrees LED lens (Whites, Red, Green and UV)
E. 12V PC fans (0.3A ~ 0.45A)
F. 12V 1A adaptor (supply for fans)
G. AWG#22 wires (good for 918mA of current), 3W LEDs have a 680mA forward current so this is enough
H. 24 inches heatsink
I. Thermal glue/paste
Tools for soldering, cutting wires.. etc
LEDs mounted on heatsink
![Image](http://i693.photobucket.com/albums/vv300/created2praise/IMG_20140407_105900_zpscd822a48.jpg)
Wiring done: Very straight forward wiring..
blue : white/green/red : blue.. 1 driver each channel
Without lens:
![Image](http://i693.photobucket.com/albums/vv300/created2praise/IMG_20140408_161250_zpsf4ba33c8.jpg)
With lens tested:
![Image](http://i693.photobucket.com/albums/vv300/created2praise/IMG_20140408_183958_zps1727a205.jpg)
Driver
![Image](http://i693.photobucket.com/albums/vv300/created2praise/IMG_20140401_193656_zps5f2af6ab.jpg)