No worries bro, here's how it works:
Gravity fed ang top-off na ito, so meaning mas mataas dapat siya sa paglalagyan ng topoff.
What you need:
A large enough plastic reservoir - halimbawa nyan ay mga bote ng mineral water. Mas malaki, mas maganda since malaki ang capacity. Pwede rin yung mga 5-gallon water jugs basta kayang i-elevate at masuportahan.
A rigid airline tube (kung wala, pwede yung holder ng mga balloons o kaya naman yung plastic case ng ballpen.
A soft airline tube (yung air hose na ginagamit sa mga airpumps)
An airline valve (ten pesos lang at most ito sa mga petshops, ito yung gagamitin natin para maregulate yung drip)
How to:
Punch two holes in the bottle cap. Make sure na sakto lang yung butas para sa airline tubing.
Hatiin mo yung rigid airline tube sa dalawa. Mas maigsi yung isa (tube A) at mas mahaba yung isa (tube B)
Tube A should be just above the water level, Tube B goes almost at the bottom of the container.
Connect the soft airline tube (airline hose) and the valve to Tube B.
Add top-off water or kalkwasser, then close the cap/lid. Make sure the container is airtight.
Blow some air on Tube A. Air will force the water to go to Tube B. Adjust mo na lang yung drip rate ng tubig, gamit yung valve.
Simple as that, punuin mo na lang uli kapag naubos na.
Sa akin kasi dati 1 liter lang ang evaporation rate ko, so 1 liter lang din ang gamit ko. Pwede namang mas malaki basta siguraduhin mo lang na sasakto yung drip rate sa evaporation rate mo para hindi sumablay ang salinity mo.
Wala kasi akong makitang lumang picture nung ginamit ko pero gagawa uli ako nito using a 6-liter plastic bottle.
HTH